Release : 1.1f 503 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.7 ip igmp robustness
This command sets the IGMP robustness value for the interface and the no form of the command
sets the robustness value to default value.
ip igmp robustness <value(1-255)>
no ip igmp robustness
Mode
Interface Configuration Mode
Defaults
2
Example
SMIS(config-if)# ip igmp robustness 100
Related Commands
show ip igmp interface - Displays the interface configuration of IGMP
To Next Page
Loading...
