Release : 1.1f 591 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.19 ipv6 pim lan-delay
This command sets the LanDelay configured for the PIMv6 router interface. The no form of the
command sets the default LanDelay for the PIMv6 router per interface.
ipv6 pim lan-delay <value(0-65535)>
no ipv6 pim lan-delay
Mode
Interface Configuration Mode
Defaults
0
Example
iss (config-if)# ipv6 pim lan-delay 120
The LAN Delay inserted by a router in the LAN Prune Delay option expresses the
expected message propagation delay on the interface. It is used by upstream routers to
find out the delayed time interval for a Join override message before pruning an interface.
Related Command
show ipv6 pim interface – Displays the PIMv6 interfaces of the router
To Next Page
Loading...
