Release : 1.1f 442 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3.21 show ip dhcp server binding
This command displays the DHCP server binding information.
show ip dhcp server binding
Mode
Privileged EXEC Mode
Example
SMIS# show ip dhcp server binding
Ip Hw Hw Alloc Expire Binding
Address Type Address Method Time State
(Secs)
------- ---- ------- ------ ------ -------
12.0.0.11 Ethernet 00:01:02:03:04:41 Dynamic 161 Assigned
20.0.0.1 Ethernet 00:01:02:03:04:31 Dynamic 7152 Assigned
Binding refers to the state of binding. This can be offered, assigned or probing. In offered
state offer is sent, but no req has been received from the client. In assigned state the
address is assigned to the client. In probing state the address is currently being probed
by the DHCP server.
Related Commands
service dhcp-server - Enables the DHCP server
host hardware-type - Specifies the hardware address of a Dynamic Host Configuration Protocol
(DHCP) client
ip dhcp option - Sets the DHCP server options
To Next Page
Loading...
