Supermicro SSE-G48-TG4 - Ip Igmp Immediate-Leave

Release : 1.1f 499 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.3 ip igmp immediate-leave
This command enables immediate leave processing on the interface and the no form of the
command disables immediate-leave processing.
ip igmp immediate-leave
no ip igmp immediate-leave
Mode
Interface Configuration Mode
Defaults
disable
Example
SMIS(config-if)# ip igmp immediate-leave
Related Commands
show ip igmp interface - Displays the interface configuration of IGMP