Release : 1.1f 160 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
5.4 logging buffered
This command enables logging to syslog buffers and configures the number of buffers to be used
to store syslog messages.
The no form of the command resets the number of buffers to its default value 50.
logging buffered <size (1-200)>
no logging buffered buffer-size
Syntax Description
buffered - Limits Syslog messages displayed from an internal buffer
Mode
Global Configuration Mode
Defaults
buffers - 50
Example
SMIS(config)# logging buffered 100
Related Command
show logging - Displays Logging status and configuration information
To Next Page
Loading...
