Release : 1.1f 142 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.102 show system environment
This command displays the temperature, fan status and power supply status information.
This command is supported only on the following switch models
SSE-X24S
SSE-X24SR
SSE-X3348S
SSE-X3348SR
SSE-X3348T
SSE-X3348TR
show system environment [{temperature | fan | power}]
Syntax Description
temperature – Displays temperature readings from temperature sensors
fan – Displays fan status
fan – Displays power supply status
Mode
Privileged EXEC Mode
Example
SMIS# show system environment temperature
To Next Page
Loading...
