Supermicro SSE-G48-TG4 - Snmp Group

Release : 1.1f 448 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
17.2 snmp group
This command configures SNMP group details. The no form of the command removes the SNMP
group details.
snmp group <GroupName> user <UserName> security-mode {v1 | v2c | v3 }
[{volatile | nonvolatile}]
no snmp group <GroupName> user <UserName> security-mode {v1 | v2c | v3
}
Syntax Description
GroupName - Name of the SNMP group
User - User Name
security-mode - Security Model
volatile | nonvolatile - Storage Type
Mode
Global Configuration Mode
Defaults
Group Name - iso/initial
Example
SMIS(config)# snmp group myv3group user myv3user securitymode v1
volatile
Related Commands
show snmp group - Displays the configured SNMP groups
show snmp user - Displays the configured SNMP users