Supermicro SSE-G48-TG4 - Debug Ip Dhcp Client

Release : 1.1f 409 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.1.3 debug ip dhcp client
This command sets the debug level for tracing the DHCP client module. The no form of the
command disables the debug level for the DHCP client.
debug ip dhcp client { all | event | packets | errors | bind }
no debug ip dhcp client { all | event | packets | errors | bind }
Syntax Description
all - All trace messages
event - Trace management messages
packets - Packets related messages
errors - Trace error code debug messages
bind - Trace bind messages
Mode
Privileged EXEC Mode
Defaults
Debugging is Disabled
Example
SMIS# debug ip dhcp client all
Related Command
show ip dhcp client stats - Displays the DHCP client statistics information