Supermicro SSE-G48-TG4 - Show Vlan Protocols-Group

Release : 1.1f 385 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.38 show vlan protocols-group
This command displays the protocol group database.
show vlan protocols-group
Syntax Description
Mode
Privileged EXEC Mode
Example
Single Instance:
SMIS# show vlan protocols-group
Protocol Group Table
--------------------
------------------------------------------
Frame Type Protocol Group
------------------------------------------
Enet-v2 IP 1
Snap Novell 2
------------------------------------------
Multiple Instance:
SMIS# show vlan protocols-group
Switch - default
Protocol Group Table
--------------------
------------------------------------------
Frame Type Protocol Group
------------------------------------------
Enet-v2 IP 1
Snap Novell 2
------------------------------------------
Related Commands
map protocol - Configures the group ID for a specific encapsulation and protocol value
combination