Supermicro SSE-G48-TG4 - Show Link-Status-Tracking

Release : 1.1f 958 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
35.4 show link-status-tracking
This command displays the link status tracking configuration information.
If the group number given it displays the information specific to the given groups. If group is not
given, it displays the information for all the configured groups.
show link-status-tracking [group <short(1-1024)>]
Syntax Description
group – Any number between 1 to 1024
Mode
Privileged/User EXEC Mode
Example
SMIS# show link-status-tracking
Link Status Tracking is Enabled
Group :1 down
Upstream Interfaces:
Ex0/1(down)
Downstream Interfaces:
Gi0/1(Dis) Gi0/2(Dis) Gi0/3(Dis) Gi0/4(Dis) Gi0/5(Dis)
Gi0/6(Dis) Gi0/7(Dis) Gi0/8(Dis) Gi0/9(Dis) Gi0/10(Dis)
Gi0/11(Dis) Gi0/12(Dis) Gi0/13(Dis) Gi0/14(Dis) Gi0/15(Dis)
Gi0/16(Dis) Gi0/17(Dis) Gi0/18(Dis) Gi0/19(Dis) Gi0/20(Dis)
Group :2 down
Upstream Interfaces:
Ex0/2(down)
Downstream Interfaces:
Related Commands
link-status-tracking – enables or disables the link status tracking feature
link-status-tracking group – creates or deletes the link status tracking groups