Release : 1.1f 821 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
30.9 debug ipv6 rip
This command enables IPv6 RIP routing protocol debugging and the no form of the command
disables IPv6 RIP routing protocol debugging.
debug ipv6 rip { all | data | control }
no debug ipv6 rip
Syntax Description
all - All resources
data - Data path messages
control - Control Plane messages
Mode
Privileged EXEC Mode
Defaults
Disabled
Example
SMIS# debug ipv6 rip all
Related Commands
show ipv6 rip database – Displays IPv6 Local RIB and routing protocol information
To Next Page
Loading...
