Release : 1.1f 165 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
5.9 cmdbuffs
This command configures the number of syslog buffers for a particular user.
cmdbuffs <user name> <no.of buffers (1-200)>
Syntax Description
user name - User Name
no.of buffers - Number of log buffers to be allocated in the system
Mode
Global Configuration Mode
Defaults
50
Example
SMIS(config)#cmdbuffs supermicro 50
CLI related events like commands given by the user, login/logout etc can be logged on to the
Syslog Server.
Related Commands
logging - Enables Syslog Server and configures the Syslog Server IP address, the log-level
and other Syslog related parameter
show logging - Displays Logging status and configuration information
To Next Page
Loading...
