Release : 1.1f 813 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
30.1 ipv6 router rip
This command enables the router configuration mode and the no form of the command disables
RIP6 on all the interfaces.
ipv6 router rip
no ipv6 router rip
Mode
Global Configuration Mode
Example
SMIS(config)# ipv6 router rip
Before configuring the router to run IPv6 RIP, the ipv6 unicast-routing must be enabled globally,
and IPv6 must be enabled on any interface in which IPv6 RIP is to be processed.
Related Command
show ipv6 rip database – Displays IPv6 Local RIB and routing protocol information
To Next Page
Loading...
