Supermicro SSE-G48-TG4 - Clear Spanning-Tree Counters

Release : 1.1f 215 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
9.19 clear spanning-tree counters
This command resets all bridge and port level statistics counters.
clear spanning-tree counters
Mode
Global Configuration Mode
Example
SMIS(config)# clear spanning-tree counters
Valid interfaces include physical ports, VLANs, and port channels
Port protocol migration count gets incremented consistently, when there is a
protocol migration
Related Commands
show spanning-tree interface - Displays the spanning tree properties of an interface
show spanning-tree mst - Port Specific Configuration - Displays multiple
spanning tree port specific configurations