Supermicro SSE-G48-TG4 - Show Ip Ospf - Database Summary

Release : 1.1f 695 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.43 show ip ospf - database summary
This command displays OSPF LSA Database summary.
show ip ospf [area-id] database [{database-summary | self-originate |
advrouter <ip-address>}]
Syntax Description
area-id - Area associated with the OSPF address range. It is specified as an IP address.
database - Displays how many of each type of LSA for each area there are in the database
database-summary - Displays how many of each type of LSA for each area there are in the
database, and the total number of LSA types
self-originate - Displays only self-originated LSAs (from the local router)
adv-router - Displays all the specified router link-state advertisements (LSAs). If no IP
address is included, the information is about the local router itself
Mode
Privileged EXEC Mode
Example
SMIS# show ip ospf database
OSPF Router with ID (10.0.0.1)
Router Link States (Area 33.0.0.12)
---------------------------------------
Link ID ADV Router Age Seq# Checksum Link count
------- ------ --- ---- -------- ----------
20.0.0.2 20.0.0.2 1 0x80000004 0xfa0 36
Network Link States (Area 33.0.0.12)
---------------------------------------
Link ID ADV Router Age Seq# Checksum Link count
------- --------- - --- -------- ----------
40.0.0.2 20.0.0.2 1 0x80000001 0xce09 32
Router Link States (Area 33.0.0.12)
---------------------------------------
Link ID ADV Router Age Seq# Checksum Link count
------- ---------- --- ---- -------- ----------
10.0.0.1 10.0.0.1 0 0x80000004 0x9d0e 48