Release : 1.1f 880 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.46 show ipv6 ospf - General Information
This command displays general information about OSPFv3 routing process.
show ipv6 ospf info
Mode
User/Privileged EXEC Mode
Example
SMIS# show ipv6 ospf info
Router Id: 11.0.0.1 ABR Type: Standard ABR
SPF schedule delay: 5 secs Hold time between two SPFs: 10
secs
Exit Overflow Interval: 0 Ref BW: 100000000 Ext Lsdb
Limit: -1
Trace Value: 0x00000800 As Scope Lsa: 0 Checksum
Sum: 0x0
Demand Circuit: Enable Passive Interface: Disable
Nssa Asbr Default Route Translation: Disable
It is an Area Border Router
Number of Areas in this router 2
Area 0.0.0.0
Number of interfaces in this area is 1
Number of Area Scope Lsa: 4 Checksum Sum: 0x1210e
Number of Indication Lsa: 0 SPF algorithm
executed: 6 times
Area 0.0.0.1
Number of interfaces in this area is 1
Number of Area Scope Lsa: 3 Checksum Sum: 0x18d41
Number of Indication Lsa: 0 SPF algorithm
executed: 2 times
Related Commands
router-id – Sets a fixed router ID
timers spf – Configures the delay time and the hold time between two consecutive SPF
calculations
abr-type – Sets the ABR (Area Border Router) type
To Next Page
Loading...
