Release : 1.1f 881 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
ASBR Router – Configures the router as an ASBR
passive-interface – Sets the global default passive interface status
nssaAsbrDfRtTrans – Enables setting of P bit in the default Type-7 LSA generated by an
NSSA internal ASBR
as-external lsdb-limit – Sets the maximum number of non-default AS-external-LSAs
entries that can be stored in the link-state database
exit-overflow-interval – Sets the number of seconds after which a router will attempt to
leave the Overflow State
demand-extensions – Enables routing support for demand routing
reference-bandwidth – Sets the reference bandwidth in kilobits per second for calculating
the default interface metrics
ipv6 ospf area – Enables OSPFv3 for IPv6 on an interface
debug ipv6 ospf – Sets the trace levels
To Next Page
Loading...
