Release : 1.1f 261 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
10.14 shutdown dot1x
This command shuts down dot1x capability and the no form of the command starts and enables
dot1x capability.
shutdown dot1x
no shutdown dot1x
Mode
Global Configuration Mode
Example
SMIS(config)# shutdown dot1x
When shutdown, all resources acquired by dot1x Module are released to the system.
Related Commands
dot1x system-auth-control - Enables dot1x in the switch
show dot1x - Displays dot1x information
To Next Page
Loading...
