Release : 1.1f 828 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.1 ipv6 router ospf
This command enables the OSPFv3 routing protocol. The no form of the command disables the
OSPFv3 routing protocol.
ipv6 router ospf
no ipv6 router ospf
Mode
Global Configuration Mode
Defaults
Disabled
Example
SMIS(config)# ipv6 router ospf
The no form of the command disables all the interfaces and triggers flushing of selforiginated
LSAs (Link State Advertisements) and deletes the router's Link State Database.
To Next Page
Loading...
