Release : 1.1f 507 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.11 debug ip igmp
This command enables the IGMP trace and the no form of the command disables the IGMP
trace.
debug ip igmp { [i/o][grp][qry][tmr][mgmt] | [all] }
no debug ip igmp { [i/o][grp][qry][tmr][mgmt] | [all] }
Syntax Description
i/o - Input/Output messages
grp - Group Related messages
qry - Query Related messages
tmr - Timer Related messages
mgmt - Management Configuration messages
all - All Traces
Mode
Privileged EXEC Mode
Defaults
Debugging is disabled by default.
Example
SMIS# debug ip igmp all
To Next Page
Loading...
