Supermicro SSE-G48-TG4 - Show Ipv6 Pim Neighbor

Release : 1.1f 597 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.24 show ipv6 pim neighbor
This command displays the PIMv6 neighbor(s) information of the router. It displays the Neighbor
Address, the interface used to reach the PIMv6 Neighbor, the Up time (the time since this
neighbor became the neighbor of the local router), Expiry Time (the minimum time remaining
before this PIMv6 neighbor will be aged out), Lan delay and Override interval.
show ipv6 pim neighbor [ Vlan <vlan-id>]
Syntax Description
Vlan - VLAN ID
Mode
Privileged EXEC Mode
Example
SMIS# show ipv6 pim neighbor
Nbr If Uptime/ Ver DRPri/ Comp Over- Lan
Address Name Expiry Mode
Id ride Delay
/Idx Interval
------------- --------- ------------ --- ------ ---- ---- -----
fe80::2:a00:a vlan1/33 00:02:33/0 v2 0/S 1 0 0
fe80::2:1400:a vlan2/34 00:02:33/0 v2 0/S 1 0 0
SMIS# show ipv6 pim neighbor vlan 1
Nbr If Uptime/ Ver DRPri/ Comp Over- Lan
Address Name Expiry Mode
Id ride Delay
/Idx Interval
------------- --------- ------------ --- ------ ---- ---- -----
fe80::2:a00:a vlan1/33 00:02:58/0 v2 0/S 1 0 0
Related Commands