Release : 1.1f 415 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.2.5 ip dhcp relay remote-id
This command configures remote identifier string to be used by the relay agent on the sub option
1 of the relay information option 82 to DHCP servers. The no form of this command clears the
remote identifier configuration. This is interface specific configuration.
ip dhcp relay remote-id <name>
no ip dhcp relay remote-id
Syntax
<name> - Any alphanumerical string up to 32 characters length
Mode
Interface Configuration Mode
Defaults
None
Example
SMIS(config-if)# ip dhcp relay remote-id dhc_rel1
Related Commands
show ip dhcp relay information - Displays the DHCP relay information
show dhcp server - Displays the DHCP server information
To Next Page
Loading...
