Release : 1.1f 600 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.26 show ipv6 pim rp-set
This command displays the PIMv6 RP-set information. It displays details of the Group Prefix, RP
address, Hold time and Expiry Time.
show ipv6 pim rp-set [rp-address]
Syntax Description
rp-address - Indicates the IPv6 address of the Rendezvous Point (RP) for the listed PIM
Sparse group.
Mode
Privileged EXEC Mode
Example
show ipv6 pim rp-set 3333::a00:a
PIM Group-to-RP mappings
------------------------
Group Address : ff00::Group Mask : 8
RP: 3333::a00:a
Component-Id : 1
Hold Time : 102, Expiry Time : 00:00:35
Related Commands
ipv6 pim rp-candidate rp-address – Enables the address of the interface, which will be
advertised as a Candidate-RP
ipv6 pim rp-static rp-address – Sets the address of the interface, which will be
advertised as a Static-RP
To Next Page
Loading...
