Release : 1.1f 666 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.16 redistribute
This command configures the protocol from which the routes have to be redistributed into OSPF
and the no form of the command disables redistribution of routes from the given protocol into
OSPF.
redistribute {static | connected | rip | bgp | all}
no redistribute {static | connected | rip | bgp | all}
Syntax Description
static - Redistributes routes, configured statically, to the OSPF routing protocol
connected - Redistributes directly connected network routes, to the OSPF routing protocol
rip - Redistributes routes that are learnt by the RIP process, to the OSPF routing protocol
bgp - Redistributes routes, that are learnt by the BGP process, to the OSPF routing protocol
all - Redistributes all routes to the OSPF routing protocol
Mode
Router Configuration Mode
Example
SMIS(config-router)# redistribute static
The ASBR Router command must be configured prior to the execution of this command.
Related Commands
default-information originate always – Enables generation of a default external
route into an OSPF routing domain
redist-config – Configures the information to be applied to routes learnt from RTM
To Next Page
Loading...
