Supermicro SSE-G48-TG4 - Debug Ip Igmp Snooping

Release : 1.1f 319 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.18 debug ip igmp snooping
This command specifies the debug levels for IGMP snooping module and the no form of the
command resets debug options for IGMP snooping module.
debug ip igmp snooping {[init][resources][tmr][src][grp][qry]
[vlan][pkt][fwd][mgmt][redundancy] | all }
no debug ip igmp snooping {[init][resources][tmr][src][grp][qry]
[vlan][pkt][fwd][mgmt][redundancy] | all }
Syntax Description
Init - Init and Shutdown Messages
resources - System Resources management Messages
tmr - Timer Messages
src - Source Information Messages
grp - Group Information Messages
qry - Query Related Messages
vlan - VLAN Information Messages
pkt - Packet Dump Messages
fwd - Forwarding Database Messages
mgmt - Management Related Messages
redundancy - Redundancy Related messages
all - All Messages
Mode
Privileged EXEC Mode
Defaults
Debugging is Disabled.
Example
SMIS# debug ip igmp snooping fwd
Related Command
show debugging- Displays state of each debugging option