Release : 1.1f 849 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.18 nssaAsbrDfRtTrans
This command enables setting of P bit in the default Type-7 LSA generated by an NSSA internal
ASBR. The no form of the command disables setting of P bit in the default Type-7 LSA generated
by an NSSA internal ASBR.
nssaAsbrDfRtTrans
no nssaAsbrDfRtTrans
Mode
Router Configuration Mode
Defaults
Disabled
Example
SMIS(config-router)# nssaAsbrDfRtTrans
Related Commands
show ipv6 ospf - General Information – Displays general information about the
OSPFv3 routing process
To Next Page
Loading...
