Supermicro SSE-G48-TG4 - Ip Igmp Snooping Retry-Count

Release : 1.1f 308 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.7 ip igmp snooping retry-count
This command sets the maximum number of group specific queries sent on a port on reception of
a IGMPv2 leave message. The no form of the command sets the number of group specific
queries sent on a port on reception of leave message to default value.
ip igmp snooping retry-count <1 - 5>
no ip igmp snooping retry-count
Mode
Global Configuration Mode
Defaults
2
Example
iss (config)# ip igmp snooping retry-count 4
Related Command
show ip igmp snooping globals - Displays the IGMP snooping information for all VLANs
or a specific VLAN