Release : 1.1f 451 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
17.4 snmp engineid
This command configures the engine identifier. The no form of the command removes the
configured engine identifier.
snmp engineid <EngineIdentifier>
no snmp engineid
Syntax Description
EngineIdentifier - Engine Id
Mode
Global Configuration Mode
Defaults
80.00.08.1c.04.46.53
Example
SMIS(config)# snmp engineid 80.0.08.1c.04.5f.a9
The Engine ID must be given as octets in hexadecimal separated by dots and the
allowed length is 5 to 32 octets.
SNMP engine ID is an administratively unique identifier.
Changing the value of the SNMP engine ID has significant effects.
All the user information will be updated automatically to reflect the change
Related Commands
show snmp engineID - Displays the Engine Identifier
show snmp user - Displays the configured SNMP users
To Next Page
Loading...
