Supermicro SSE-G48-TG4 - Debug Ip Dhcp Server

Release : 1.1f 439 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3.18 debug ip dhcp server
This command enables the debug level for tracing the DHCP server Module. The no form of this
command disables the debug level for tracing the DHCP server Module.
debug ip dhcp server { all | events | packets | errors | bind }
no debug ip dhcp server { all | events | packets | errors | bind }
Syntax Description
all - All trace messages
events - Trace management messages
packets - Packet related messages
errors - Trace error code debug messages
bind - Trace bind messages
Mode
Privileged EXEC Mode
Defaults
Debugging is disabled
Example
SMIS# debug ip dhcp server all
Related Commands
service dhcp-server - Enables the DHCP server
show ip dhcp server information - Displays the server information
show ip dhcp server binding - Displays the DHCP server binding information