Release : 1.1f 741 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.33 bgp ecomm-policy
This command configures the extended community attribute advertisement policy for specific
destination.
The no form of the command removes the extended community attribute advertisement policy for
specific destination.
bgp ecomm-policy <ip-address> <ip_mask> <set-add|set-none|modify>
no bgp ecomm-policy <ip-address> <ip_mask>
Syntax Description
ip-address - The route prefix on which extended community policy needs to be applied
ip_mask - The mask associated with the ip address
set-add - Sends associated route with configured additive extended-communities only
set-none - Sends the associated route without any extendedcommunities
modify - Strips the associated route with received delete extended communities and adds the
configured additive extended communities
Mode
Router Configuration Mode
Example
SMIS(config-router)# bgp ecomm-policy 12.0.0.0 255.0.0.0 setadd
BGP Speaker Local AS number must be configured.
Related Commands
router bgp – Sets the AS number of the BGP Speaker
show ip bgp extcommunity – Displays the contents of route/peer/filter/policy ext-community
route tables
To Next Page
Loading...
