Release : 1.1f 780 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.6 ipv6 - neighbor
This command configures a static entry in the IPv6 neighbor cache table. The no form of the
command removes the static entry from the IPv6 neighbor cache table.
ipv6 neighbor <prefix> {vlan <id> } <MAC ADDRESS (xx:xx:xx:xx:xx:xx)>
no ipv6 neighbor <prefix> {vlan <id>} <MAC ADDRESS
(xx:xx:xx:xx:xx:xx)>
Syntax Description
prefix - IPv6 Prefix of the neighbor
vlan - VLAN Identifier
MAC ADDRESS - Link layer address of the interface
Mode
Global Configuration Mode
Example
SMIS(config)# ipv6 neighbor 3333::1111 vlan 1 00:11:22:33:44:55
Related Command
show ipv6 neighbors – Displays the IPv6 Neighbour Cache Entries
To Next Page
Loading...
