Release : 1.1f 458 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
17.9 snmp notify
This command configures the SNMP notification details. The no form of this command removes
the SNMP notification details.
snmp notify <NotifyName> tag <TagName> type {Trap | Inform} [{volatile
| nonvolatile}]
no snmp notify <NotifyName>
Syntax Description
NotifyName - Notification Name
tag - Tag Name
type - Type of Notification
volatile | nonvolatile - Storage type of the notification details
Mode
Global Configuration Mode
Defaults
Notify Name - iss/iss1
Notify Tag - iss/iss1
Storage type - volatile
Example
SMIS(config)# snmp notify note1 tag tag1 type Inform
Related Commands
show snmp notif - Displays the configured SNMP Notifications
show snmp targetaddr - Displays the configured SNMP target Addresses
To Next Page
Loading...
