Release : 1.1f 429 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3.9 domain-name
This command sets the domain name in the DHCP server configuration parameters. The no form
of the command deletes the domain name from the DHCP server configuration parameters.
domain-name <domain (63)>
no domain-name
Syntax Description
domain - Client's domain name string
Mode
DHCP Pool Configuration Mode
Example
SMIS(dhcp-config)# domain-name supermicro
The configuration of this command will take effect only after configuring the network address pool
using network command.
Related Commands
service dhcp-server - Enables the DHCP server
show ip dhcp server information - Displays the server information
show ip dhcp server pools - Displays the DHCP server pools
show ip dhcp server binding - Displays the DHCP server binding information
show ip dhcp server statistics - Displays the DHCP server statistics
network - Configures the network IP address of the DHCP Address Pool
To Next Page
Loading...
