Supermicro SSE-G48-TG4 - Ipv6 - Link Local Address

Release : 1.1f 778 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.4 ipv6 - link local address
This command configures the IPv6 link-local address on the interface. The no form of the
command deletes the configured IPv6 link-local address.
ipv6 address <prefix> link-local
no ipv6 address <prefix> link-local
Syntax Description
prefix - IPv6 Prefix for the interface
link-local - Type of address
Mode
Interface Configuration Mode
Example
SMIS(config-if)# ipv6 address fe80::2222 link-local
The prefix specified must be a valid link-local prefix.
Related Command
show ipv6 interface – Displays the IPv6 interfaces