Supermicro SSE-G48-TG4 - Show Ip Ospf Route

Release : 1.1f 694 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.42 show ip ospf route
This command displays routes learnt by OSPF process.
show ip ospf route
Mode
Privileged EXEC Mode
Example
SMIS# show ip ospf route
OSPF Process Routing Table
Dest/Mask TOS NextHop/Interface Cost Rt.Type Area
--------- --- -------/--------- ---- ------- ----
10.0.0.0/255.0.0.0 0 0.0.0.0/vlan10 1 IntraArea 33.0.0.12
40.0.0.0/255.0.0.0 0 0.0.0.0/vlan1 1 IntraArea 33.0.0.12
Related Commands
router ospf – Enables OSPF routing process
router-id – Sets the router-id for the OSPF process