Release : 1.1f 33 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
address.
ntp broadcast This command enables the SNTP broadcast
client. This is used to enable SNTP client to
accept SNTP traffic from any broadcast server.
ntp enable This command enables SNTP.
ntp disable This command disables SNTP.
tz offset This command configures the time zone offset
with respect to coordinated universal time
(UTC).
show ntp This command displays SNTP configurations.
clock set This command manages the system clock.
show clock This command displays the system date and
time.
Configuration File Management Commands
Command Description
write Stores running configuration as startup
configuration or into given file name in flash.
set startup-config This command configures the default
restoration file.
copy Copies flash files or remote files to flash.
copy startup-config Copies startup configuration to other flash file
or remote flash file.
copy- file Copies files from flash to remote vice versa.
erase Deletes startup configuration file or any flash
file.
list files Lists all the configuration files stored in flash.
show file Displays the file contents
show startup-config Displays the startup config file contents
show stored-config Displays the given configuration file contents
Interface Commands
To Next Page
Loading...
