Release : 1.1f 518 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
20.3 export ospf
This command enables redistribution of OSPF (Open Shortest Path First) area / External routes
to the protocol and the no form of the command disables redistribution of OSPF area / External
routes to the protocol.
export ospf {area-route|external-route} {rip|bgp}
no export ospf {area-route|external-route} {rip|bgp}
Syntax Description
area-route - OSPF inter-area and intra-area address/mask pairs to be exported into the
routing protocol
external-route - OSPF Type 1 and Type 2 External address/mask pairs to be exported into
the routing protocol
rip - Routing Information Protocol
bgp - Border Gateway Protocol
Mode
Global Configuration Mode
Example
iss (config)# export ospf area-route rip
Related Command
show ip protocols – Displays information about the active routing protocol process
To Next Page
Loading...
