Release : 1.1f 288 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
13.7 lacp timeout
This command sets the LACP timeout period and the no form of the command sets the LACP
timeout period to the default value.
lacp timeout {long | short }
no lacp timeout
Syntax Description
long - Long timeout value
short - Short timeout value
Mode
Interface Configuration Mode
Defaults
long
Example
SMIS(config-if)# lacp timeout short
The long timeout value means that LACP PDU will be sent every 30 seconds and LACP timeout
value (no packet is received from peer ) is 90 seconds.
The short timeout value means that LACP PDU will be sent every 1 second and
timeout value is 3 seconds.
Related Command
show etherchannel - Displays etherchannel detailed / portinformation
To Next Page
Loading...
