Release : 1.1f 299 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
13.11 debug la
This command enables the display of link aggregation debug messages.
The no form of this command disables the display of link aggregation debug messages.
debug la [{all | [init-shut] [mgmt] [data] [ctrl] [pkt-dump] [resource]
[all-fail] [buf] [sel] [pdu <iftype> <ifnum>] }]
no debug la [{all | [init-shut] [mgmt] [data] [ctrl] [pkt-dump]
[resource] [all-fail] [buf] [sel] [pdu <iftype> <ifnum>] }]
Syntax Description
all – displays all debug messages
init-shut – displays initialization and shutdown messages
mgmt – displays management messages
data – displays all data path messages
ctrl – displays all control messages
pkt-dump – displays the contents of all LACP packets
resource – displays the resources (like memory) utilization debug messages
all-fail – displays all failure events
buf – displays the buf utilization debug messages
sel – displays the selector related debug messages
pdu – displays all the LACP packets received and transmitted on the given interface
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged/User EXEC Mode
Defaults
Disabled
Example
SMIS# debug la all
Related Commands
To Next Page
Loading...
