Release : 1.1f 406 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.1 DHCP Client
16.1.1 release
This command immediately releases the DHCP lease on the interface specified.
release dhcp [{ vlan <short (1-4069)> | <iftype> <ifnum> }]
Syntax Description
vlan - VLAN Identifier
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Defaults
Disabled by default
Example
SMIS# release dhcp vlan 1
VLAN interface must have an IP address assigned by the DHCP server.
If the router interface was not assigned a DHCP IP address by the DHCP server, the
release dhcp command fails and displays the following error message: Interface does not
have a DHCP originated address
Related Commands
ip address - Configures the current VLAN interface to dynamically acquire an IP address from
the DHCP server
show ip dhcp client stats - Displays the DHCP client statistics information
show ip interface - Displays the IP interface statistics and configuration
To Next Page
Loading...
