Release : 1.1f 609 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
24.2 interface vlan
This command selects an interface to configure. The no form of the command deletes the virtual
router entries on the given Interface.
interface [{ vlan <integer (1-4069)> | <iftype> <ifnum> }]
no interface [{ vlan <integer (1-4069)> | <iftype> <ifnum> }]
Syntax Description
vlan-id - VLAN Identifier
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
VRRP Router Configuration Mode
Example
SMIS(config-vrrp)# interface vlan 3
VRRP must be enabled prior to the execution of this command.
This interface must have an ip address prior to the execution of this command
Related Commands
router vrrp – Enables VRRP in the router
show vrrp – Displays the VRRP status information
To Next Page
Loading...
