Supermicro SSE-G48-TG4 - Ip Igmp Snooping Query-Interval

Release : 1.1f 314 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.13 ip igmp snooping query-interval
This command sets the time period with which the general queries are sent by the IGMP
snooping switch when configured as querier on a VLAN. The no form of the command sets the
IGMP querier interval to default value.
ip igmp snooping query-interval <(60 - 600) seconds>
no ip igmp snooping query-interval
Mode
Config-VLAN Mode
Defaults
125
Example
iss (config-vlan) # ip igmp snooping query-interval 200
Related Command
show ip igmp snooping - Displays IGMP snooping information for all VLANs or a specific
VLAN