Release : 1.1f 818 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
30.6 ipv6 rip metric-offset
This command adjusts default metric increment.
ipv6 rip metric-offset <integer (1-15)>
Mode
Interface Configuration Mode
Example
SMIS(config-if)# ipv6 rip metric-offset 6
The ipv6 rip metric-offset command is used in conjunction with the redistribute router
configuration command to cause the current routing protocol to use the same metric value for all
redistributed routes.
The maximum metric that RIP can advertise is 16, and a metric of 16 denotes a route that is
unreachable.
Related Command
show ipv6 rip database – Displays IPv6 Local RIB and routing protocol information
To Next Page
Loading...
