Release : 1.1f 488 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
18.6 arp timeout
This command sets the ARP (Address Resolution Protocol) cache timeout and the no form of the
command sets the ARP cache timeout to its default value.
arp timeout <seconds (30-86400)>
no arp timeout
Mode
Global Configuration Mode
Defaults
7200
Example
SMIS(config)# arp timeout 35
Related Command
show ip arp – Displays IP ARP table for the given VLAN ID/IP Address of ARP entry/MAC
Address of ARP entry/IP ARP summary table/ARP configuration information
To Next Page
Loading...
