Supermicro SSE-G48-TG4 - Show Ip Ospf Neighbor

Release : 1.1f 687 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.35 show ip ospf neighbor
This command displays OSPF neighbor information list.
show ip ospf neighbor [vlan <vlan-id (1-4069)> | <iftype> <ifnum>]
[Neighbor ID] [detail]
Syntax Description
vlan - LSA retransmissions for adjacencies belonging to the VLAN interface
Neighbor ID - Neighbor router ID
detail - OSPF Neighbor information in detail
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Example
SMIS# show ip ospf neighbor
Neighbor-ID Pri State DeadTime Address Interface
---------- ----- -------- ------- ---------
20.0.0.2 1 FULL/BACKUP 33 40.0.0.2 vlan1
Related Command
neighbor – Specifies a neighbor router and its priority