Release : 1.1f 686 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Related Commands
passive-interface vlan – Suppresses routing updates on an interface
passive-interface default – Suppresses routing updates on all interfaces
ip ospf demand-circuit – Configures OSPF to treat the interface as an OSPF demand
circuit
ip ospf hello-interval – Specifies the interval between hello packets sent on the
interface
ip ospf dead-interval – Sets the interval at which hello packets must not be seen before
neighbors declare the router down
ip ospf cost – Specifies the cost of sending a packet on an interface
To Next Page
Loading...
