Release : 1.1f 976 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.15 lldp transmit | receive
This command enables the transmit and receive of LLDP messages on any interface.
The no form of this command disables the transmit and receive of LLDP messages on any
interface.
lldp {transmit | receive}
no lldp {transmit | receive}
Syntax Description
transmit – Enables transmission of LLDP messages
receive - Enables receive of LLDP messages
Mode
Interface Configuration Mode
Defaults
Both transmit and receive enabled
Example
SMIS(config-if)# lldp transmit
Related Commands
show lldp interface – Displays the LLDP interface information.
To Next Page
Loading...
