Release : 1.1f 692 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.40 show ip ospf - summary address
This command displays OSPF summary-address redistribution Information.
show ip ospf {area-range | summary-address}
Syntax Description
area-range - Area associated with the OSPF address range. It is specified as an IP address
summary-address - Aggregate addresses for OSPF
Mode
Privileged EXEC Mode
Example
SMIS# show ip ospf area-range
Display of Summary addresses for Type3 and Translated Type5
OSPF Summary Address Configuration Information
----------------------------------------------
Network Mask LSAType Area Effect Tag
------- ------- ---- ------ ---
10.0.0.0 255.0.0.0 Summary 33.0.0.12 Advertise 1074636208
SMIS# show ip ospf summary-address
Display of Summary addresses for Type5 and Type7 from
redistributed routes
OSPF External Summary Address Configuration Information
-----------------------------------------------------
Network Mask Area Effect TranslationState
------- ---- ---- ------ ------------
10.0.0.1 255.0.0.0 33.0.0.12 advertiseMatching enabled
Related Commands
area - range – Consolidates and summarizes routes at an area boundary
summary-address – Creates aggregate addresses for OSPF
To Next Page
Loading...
