Release : 1.1f 555 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.21 ip pim lan-delay
This command sets the LanDelay configured for the router interface and the no form of the
command sets the default LanDelay (0) for the router per interface.
ip pim lan-delay <value(0-65535)>
no ip pim lan-delay
Mode
Interface Configuration Mode
Defaults
0
Example
iss (config-if)# ip pim lan-delay 120
The LAN Delay inserted by a router in the LAN Prune Delay option expresses the
expected message propagation delay on the interface. It is used by upstream routers to
find out the delayed time interval for a Join override message before pruning an interface.
Related Command
show ip pim interface – Displays the routers PIM interfaces
To Next Page
Loading...
