Release : 1.1f 769 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.56 show ip bgp extcommunity
This command displays the contents of ext-community tables.
show ip bgp extcommunity {route|peer|policy|filter}
Syntax Description
route - Entry in additive or delete ext community table
peer - Advertisement of ext community attributes to peer
policy - Extended community attribute advertisement policy for specific destination
filter - Filters the ext community attribute while receiving or advertising
Mode
Privileged EXEC Mode
Example
SMIS# show ip bgp extcommunity route
Additive Ext-Community Table
Prefix PrefixLen AddEcommVal
------ --------- -----------
30.0.0.0 8 1:1:22:33:44:55:66:77
60.0.0.0 8 1:1:22:33:44:55:66:88
75.0.0.0 8 1:1:33:33:33:33:33:33
76.0.0.0 8 1:2:44:33:33:33:33:33
78.0.0.0 8 1:2:33:33:33:33:33:33
78.0.0.0 8 1:2:33:33:33:33:33:44
79.0.0.0 8 1:2:33:33:33:33:33:44
79.0.0.0 8 1:2:33:33:33:33:33:33
Delete Ext-Community Table
Prefix PrefixLen DeleteEcommVal
-------- --------- ---------------
40.0.0.0 8 1:1:55:33:44:55:66:77
70.0.0.0 8 1:1:22:33:44:55:66:99
SMIS# show ip bgp extcommunity filter
Incoming Filter Table
EcommValue FilterStatus
---------- -------------
To Next Page
Loading...
